Campbell Fittings: Part C

Purchase Part C

Designed for use with campbell Interlocking Ferrules.
360� interlock groove on fitting locks ferrule into place for the ultimate in holding power.
Shank and ferrule lengths are matched for performance and avoid potential hose tube or hose cover damage.
Serrations designed to grip, seal, and protect hose when crimped. Note: Traditional "two bump" designs are for banding, not crimping. NAHAD and Campbell do not recommend crimping on "two bump" shanks.
Crimped assemblies are low profile and eliminate sharp edges from clamp buckles.
Couplings and Goodyear Instalock Cam & Groove Couplings to keep your inventory as flexible as possible.
Designed to couple and interchanging made to ASTM F1122, CID A-A-59326, MIL-C-27487

For more information go to www.p65.warnings.ca.gov

C-BR-75 Part C