CATALOG SECTION G:
Ferrules & Sleeves for
High, Medium, and Low-Pressure Hose Systems

CampbellCrimpnology™
Crimpnology refers to all of the technology involved in crimping: the integrated design of every fitting, coupling, ferrule, and sleeve; the crimp procedures; crimp specifications; and crimp training & support.
Feature and Benefits
Crimpnology offers the following “7 Essentials” for crimping safe, repeatable, performance-rated hose systems:
• Interlock groove on all fittings and couplings is compatible with the turn-in end of the ferrule to ensure a 360° ferrule-to-fitting interlock.
• Serrations specifically designed for crimping provide maximum hose retention without potential tube failure.
• Shank length and ferrule/sleeve length are matched to maximize retention and to avoid hose tube or cover damage.
• Detailed assembly procedures are provided, including information to ensure use of compatible components.
• Detailed crimping procedures (lower right) ensure appropriate crimp specification is derived for each hose and fitting combination.
• On-site crimping training by a Hose System Specialist, including a CD/video for review (bottom right), is offered by Campbell to assist distributor personnel.
• A daytime, toll-free “hotline” is manned by a Campbell Hose System Specialist to assist in all aspects of training.
Performance-Rated
All Campbell pressure ratings are established and verified by hydrostatic testing to a 4X safety factor where applicable (see table below for pressure rating information). Test data and information regarding various combinations of hoses and fittings are available upon request.
Note: Campbell sleeves may be used on non-Campbell fittings. We cannot provide crimp specifications or recommend working pressures for non-Campbell parts. The pressure ratings in this catalog are valid only when using all Campbell parts. For safety and quality assurance, always proof test hose assembly according to NAHAD guidelines.
Top of Page



Top of Page