Fittings & Accessories for
Multi-Purpose and Utility Hose

CRIMPNOLOGY NIPPLES
Features & Benefits
• Designed for use with Campbell interlocking ferrules.
• Interlock groove locks ferrule into place for the ultimate in holding power. (See chart below.)
• Graduated serration pattern - sharper near the interlock, rounder near the end, with smooth end detail to reduce potential failure due to abrasion - grips, seals, and protects hose.
• Crimped assemblies are low-profile and eliminate sharp edges from buckles.
Recommended Hose Attachment
• Interlocking ferrules
Recommended Use
• Multi-purpose air, fliud, bulk handling
Top of Page

COMBINATION NIPPLES AND MENDERS
Features & Benefits
• Maximum number of serrations for maximum holding power.
• Long lead serration for easier hose insertion.
• Formed hex wrench area on 3/4” through 2” combination nipples for easier installation.
Recommended Hose Attachment
• Sleeves
• Preformed Bands
Recommended Use
• Multi-purpose fluid, bulk handling, low-pressure air
Top of Page

SUCTION HOSE COUPLINGS
Features & Benefits
• Maximum number of serrations for maximum holding power.
• Long lead serration for easier hose insertion.
• Suction Couplings machined from pipe eliminate porosity and parting lines, improving sealing and retention.
Recommended Hose Attachment
• Sleeves
• Preformed Bands
Recommended Use
• Multi-purpose fluid, bulk handling, low-pressure air
Top of Page

(1) Working pressure ratings are based on using any smooth bore rubber hose except steam and hot tar.
(2) Working pressure ratings are based on using any smooth bore rubber hose except chemical, steam, and hot tar.

• For plastic chemical hose, refer to section D. For steam and hot tar hose refer to section C.
• Working pressure ratings are based on using CampbellCrimpnology™ products only, and that proper crimping procedures have been followed.
• The above chart does not include plastic fittings or couplings.
• Working pressure ratings are maximum as listed or the hose rating, whichever is lower.
• Refer to Temperature Derating Chart for temperatures above 70°F.

Top of Page